Cleaning a New-Build Apartment in Ajman Before You Move In

Getting the keys to a brand-new apartment feels like the end of the job. Then you run a finger along a window sill. New builds come with their own kind of mess: fine plaster and grout dust in every cupboard, paint spots, protective film and a cloudy haze on the tiles.

Quick answer: Clean a new-build flat before the furniture arrives. Work top to bottom and dry before wet: dust ceilings, vents and cupboards first, then remove film and stickers, then wash. Never use acid-based cleaners on marble or natural stone, because acid etches the surface.

What Builders Leave Behind

• Plaster, grout and cement dust, which is finer than household dust and gets into cupboards, AC grilles and light fittings
• Protective film on window frames, appliances and sometimes cabinet doors
• Paint spots and silicone smears on glass, tiles and fittings
• Cement haze, a dull film left on tiles after grouting
• Debris in sliding door tracks and drains

The Right Order

• 1. Dry dust from the top down. Ceilings, light fittings, AC grilles, then the tops of cupboards.
• 2. Vacuum everything, including inside every cupboard and drawer, before any water touches it.
• 3. Remove film and stickers. Peel slowly; lift adhesive with a suitable remover, not a blade on soft surfaces.
• 4. Wash surfaces and glass. Paint spots on glass can be lifted with a proper glass scraper held flat.
• 5. Floors last, with the right product for the material.

The golden rule for new builds: the dust you cannot see in the cupboards is what ends up on your clothes and plates.

Protect the New Surfaces

Many new Ajman apartments have marble or porcelain floors. Acidic cleaners, including vinegar and limescale removers, etch marble and leave dull patches that cannot simply be wiped away. Use a pH-neutral cleaner on stone, and test anything new on a hidden corner first.

What This Means in Practice

The new towers along the Corniche and in Ajman Downtown, and the newer communities in Al Zorah, Al Jurf and Al Yasmeen, are full of newly handed-over flats, and all of them get the same builder's dust. For a flat that has also had work done after handover, such as a new kitchen or flooring, our post-renovation cleaning guide covers the heavier clean-up.

Frequently Asked Questions

How much does a new-build clean cost in Ajman?
House cleaning in Ajman starts from AED 50 an hour for regular cleaning, and a deep clean is priced by home size: AED 400 for a studio, AED 500 for one bedroom, AED 650 for two, AED 850 for a three-bedroom apartment and AED 1,000 for a three-bedroom villa. Heavy post-construction clean-up is charged from AED 120 an hour.

Should I clean before or after the furniture arrives?
Before. An empty flat can be cleaned inside every cupboard and along every skirting board.

Can you remove paint spots from glass?
Yes, in most cases. Fresh paint and silicone smears lift with the right scraper and remover.

Is one clean enough?
Usually. Construction dust can keep settling for a week or two, so some people book a lighter follow-up clean after moving in.

The Short Version

• Clean before the furniture arrives.
• Top to bottom, dry before wet.
• No acid on marble or natural stone.
• New-build cleaning in Ajman starts from AED 400 for a studio.

Laundrykhalas cleans homes and offices across Ajman. Offices can book commercial cleaning in Ajman from AED 60 an hour. Message us on WhatsApp before noon for same-day cleaning.